Sanyo PDG-DHT100L Projector - Products

Sanyo - Sanyo PDG-DHT100L Projector

Features

Full HD projector

Description

The PDG-DHT100L answers the growing needs in the digital signage market for use in brighter environments. This bright projector is designed to handle Full HD (1920 x 1080) high quality resolution image projection, it meets the changing needs of the marketplace for more widespread use of high definition input signals. A powerfull 6500 ansilummen !!

Tech Specs

Info

Resolution HD 1920 x 1080 (UXGA dot resizing possible)
Brightness (typical) 6,500 ANSI lumens
Contrast Ratio 7,500:1
Panel System DLP® 1-chip system
Number of Pixels (2,073,600) 1920×1080 (16:9)
Uniformity 90%
Scanning Frequency Horizontal: 15-120KHz, Vertical: 48-120Hz,
Dot Clock: 230 MHz or less (analog)
Input signal compatibility
UXGA/SXGA+/SXGA/WXGA/XGA/SVGA/VGA/MAC,
1080p-24/25/30/48/50/60, 1080psf-24/25/30,
1080i-50/60,720p-50/60/575p/480p/575i/480i
Color System PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N
Up/Down Ratio Up/Down (6.65:-1 ～ -1:6.65) Left/Right (10.7:1 ～ 1:10.7)
depends on Lens
Digital Keystone V: +/- 30 °, H: +/- 30 °
Digital Zoom 49x - 1/4x
Projection Lamp(s) 330W UHP Lamp x 2
Power Consumption 846W (Normal) 758W (Eco1)
Fan Noise 36 dB (Eco1)

Terminals

PC Input/Output
Input 1: Digital video input x 2 ; DVI-D x 1(HDCP compatible),
HDMI x 1(Ver 1.3b(Deep color))
Analog RGB input x 1 ; D-sub 15-pin x 1
Input 2: BNC x 5 (RGBHV, VIDEO/Y-Pb/Cb-Pr/Cr), S-video x 1
Input 3: Expansion slot (empty)
Input 4: RJ45 LAN x 1, Serial D-sub9 IN x 1
(Expansion slot:POA-MD13NET2)Monitor output : D-sub15 x 1(Analog RGB, YPb/Cb-Pr/Cr, VIDEO)
Serial port : D-sub9 IN x 1 / OUT x 1
Wired remote control port : Mini-jack x 1
Service port : USB type B x 1